Type of Backs:
Only 8x12 standard size picture frames or smaller will come with an easel backing. These frames will not include hanging materials, but sawtooth hangers can be purchased for an additional charge. 9 x 12 picture frames or larger will include a flat backing and an attached hanger. The flat backing material that is used for 9x12 picture frames and larger is a material called Fiber Char which is a form of cardboard. White and Black Foamcore backing is available for an additional cost upon request. The backing that comes with our frames is not Acid Free.
We advise hanging your picture frame in an area that is not in contact with direct sunlight or moisture to avoid the frame's back becoming warped.
Type of Hanging Hardware:
-
Sawtooth Hangers
A sawtooth hanger is either nailed or screwed into the back of a frame at the top center depending on what type you have. Our frames come standard with a screw in type. It is the easiest form of the hanging options to install, making it a popular choice for standard framing projects. The weight of the picture frame is supported at a single point so these are best suited for smaller or lightweight frames. Sawtooth hangers are also useful for hanging Shadowboxes. Using one hanger near each of the two upper corners evenly distributes the frame's weight and keeps the back of the frame flush with the wall.
Check out our blog post on how to Install a sawtooth hanger here
-
Wire Hanger Kits
A Wire hanging assembly consists of a length of wire and two eyehooks. The wire is strung between the two eyehooks, which are screwed into opposite sides of the frame. One of the benefits of a wire hanger is its ability to support heavier frames. The weight of the frame is divided between the two vertical sides of the frame. Also the hanger assembly is secured to the frame using screws instead of nails. A wire hanger is used in conjunction with a picture hanger nailed in the wall. We have Wire Kits available for purchase to use to hang a picture with wire of the sawtooth hanger.
